![]() ![]() Rubber Bumpers – remove all rubber bumpers and strips that are for the original HDD from the iPod, these are not required for use with iFlash adapters. The iPod motherboard side can sometimes be warped – you may be able to recover it by straightening it slightly, otherwise you will need a new ribbon. HDD Ribbon – If you are having any issues it will generally be due to a damaged or faulty HDD ribbon, to confirm remove ribbon and inspect for cracks or tears. ZIF Connector – lift the black bar on the ZIF connector on the iFlash board before trying to fit the HDD ribbon, the zif connector should always face out (this is the opposite to the original HDD). With care and the correct use of the tools, it is totally possible to open with no damage. Opening iPods – take your time to minimise damage to the case back, there are plenty of videos on the internet which show iPods being opened – we suggest watching some to understand how the iPod is held together. While we can recommend products the choice comes down to your personal preference and of course budget, but our list makes a good starting point for the decision process! General Tips Other users like the idea of mSata or M.2 drives, you may have some drives left over from previous upgrades or projects. you may prefer to get the iFlash-Quad rather than the iFlash-Solo. Of course if you are after flexibility and want to start with 128GB before slowly moving up to say 512GB or even 1TB. NOTE: Make sure your iPod model is listed as compatible with the iFlash board recommended especially the 3rd and 4th Gen iPods. Using the iFlash-Solo, iFlash-Dual or iFlash-Quad ![]() IFlash-Solo with 128GB to 256GB SDXC card IFlash-ATA1 with 128GB to 256GB SDXC card IFlash-Solo and 4th Gen Converter with an 128GB SDXC card #IFLASH FAN UPGRADE#Our recommended upgrade path by iPod model for newbie modders are : 3rd Gen However, we do understand especially for new users just starting in the world of iPod modding the choices can be overwhelming. ThermalTake says they will take this into consideration for future products.Everyone is different and we think providing choice is important hence why we have an extensive range of products to fit with everyones needs / desires / budgets and the need to go extreme □ this will be a big problem as they are used to the Fahrenheit temperature scale. For most people, this won't really be a problem but for consumers living in the U.S. There's no switch to switch it to Fahrenheit and AFAIK ThermalTake doesn't ship a Fahrenheit-only version of this fan. The only problem I noticed is that the thermal info displayed on the iFlash 12+ is only available in Celsius. Photos are nice but with fancy products like this video is even better, so here's a short 40 seconds clip showing you the lightshow of the iFlash+ fan. It certainly looks really impressive, even in daylight. I connected the fan to a Molex connector in my case and after a few seconds I saw two blue circles and the ThermalTake logo rotating on the fan blades, the temperature display follows a bit later. The small green thingie is the temperature sensor.īesides the fan, the package also included a bag of fan screws and a 3 to 4-pin cable to connect the fan to a regular Molex connector. The front which features a shiny ThermalTake logo. The design of this fan is completely different than regular LED fans.Īnd this is the back which shows you ThermalTake used their TT-1225A fan for the 120mm iFlash+. On top of the fan is a streamlined cover that displays the "ThermalTake" logo and the current environment temperature onto the spinning fan blades. The iFlash+ has a 3-pin connector but fortunately, the package also contains an extension cable that allows you to connect it to a regular 4-pin Molex connector. Here's a look at the specifications of the ThermalTake iFlash+ (12cm) A2445 fan:Īccording to these specifications, the iFlash+ is relatively quiet with a max noise level of 25dBA but it's still capable of moving lots of air. The fan arrives in this nice, easy to open package. This isn't just an ordinary LED fan, no, this 120mm fan projects the temperature and shows a rotating and dancing "ThermalTake" logo. It's been a few years since we've seen any innovative new ideas to make fans fancier and prettier but now ThermalTake released the iFlash+ 120mm fan which definitely gives a new spin to fans. That was until case modders started modding them and manufacturers started mass producing fans with LEDs and other special features like fans with UV reactive paint. ThermalTake iFlash+ 120mm fan reviewIn the beginning, computer fans were just boring black units that were used to cool computer hardware. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |